01
Physical
- Form factor
- PLL long-pin · 2G11 base
- Length
- ~16.5 in (419 mm) typ.
- Diameter
- 1.2 in (30 mm) typ.
- Weight
- 0.22 lb (100 g) typ.
- Operating temp
- -20°C to +45°C
TUBULⒶRCH · LINEAR LED RETROFIT · PLL · 2G11 BASE
Long-Pin PLL LED PLL Lamps
PLL (long-pin) fluorescent replacements for 2G11 base fixtures — wraparound fixtures, corridor lighting, and recessed downlights. Type A (ballast-compatible) and Type B (bypass) in one SKU. The tubulⒶRCH long-pin PLL retrofit.
- 12–18W
- Wattage range
- 1,200–1,800 lm
- Lumen output
- 80+
- CRI
- 5-yr
- Warranty
cULus LISTED UL TYPE A+B HYBRID 5-YEAR WARRANTY
— LINEAR LED RETROFIT · PLL · 2G11 BASE
The PLL retrofit for wraparound and corridor fixtures with 2G11 base.
PLL (long-pin) fluorescent replacements for 2G11 base fixtures — wraparound fixtures, corridor lighting, and recessed downlights. Type A (ballast-compatible) and Type B (bypass) in one SKU. The tubulⒶRCH long-pin PLL retrofit.
FULL SPECIFICATIONS
The numbers that matter to a spec writer.
02
Photometrics
- Lumen output
- 1,200–1,800 lm (wattage-dependent)
- Efficacy
- Up to 100 lm/W
- CCT options
- 3000K · 3500K · 4000K · 5000K
- CRI
- ≥80
- L70 life
- >50,000 hours (TM-21, 35°C ambient)
03
Electrical
- Input voltage
- 120–277V AC · 50/60 Hz
- Wattage range
- 12W – 18W (per SKU)
- Power factor
- >0.90
- THD
- <20%
- Start time
- <0.5 s to full output
04
Retrofit Type & Compatibility
- Type A (ballast-compatible)
- Works with electronic PLL ballasts · no rewiring
- Type B (bypass)
- Direct line-voltage wiring · ballast removed
- Hybrid
- Same SKU supports both Type A and Type B
- Ballast compatibility
- See Ballast Compatibility List
05
Compliance & Listings
- Safety
- UL 1598C · CSA · cULus Listed
- EMC
- FCC Part 15 Class B
- DLC
- Check Rebate Center for the DLC QPL ID — confirm the listing for your catalog number before specifying.
- Warranty
- 5 years · pro-rated · field-failure replacement
— ENGINEERING CANDOR · LAB VS. FIELD
Where the spec-sheet number and the field number diverge.
PLL 2G11 ballasts are among the least standardized in commercial fluorescent. The Long-Pin PLL has been tested against electronic 2G11 ballasts. Magnetic 2G11 ballasts require Type B bypass. The ballast compatibility list documents this by model; the spec sheet alone will not catch magnetic-ballast fixtures.
RESOURCES
Everything a spec writer needs in one click.
Request Datasheet
Long-Pin PLL product datasheet
Request via sales →
Request IES Files
Photometric data per CCT and series
Request via sales →
Request Ballast Compatibility List
Per-ballast pass / caveat at rated load
Request via sales →
Request Install Guide
Installation instructions for Long-Pin PLL
Request via sales →
ORDERABLE VARIANTS
Active Long-Pin PLL variants. 2G11 base.
| SKU | DESCRIPTION | BASE | WATTS | EQ. | LUMENS | CCT | CRI | CERT |
|---|---|---|---|---|---|---|---|---|
| LTPLL-12W-30K-2G11 | PLL · 2G11 | 2G11 | 12W | 36W | 1,200 | 3000K | 80+ | DLC |
| LTPLL-12W-40K-2G11 | PLL · 2G11 | 2G11 | 12W | 36W | 1,200 | 4000K | 80+ | DLC |
| LTPLL-18W-35K-2G11 | PLL · 2G11 | 2G11 | 18W | 55W | 1,800 | 3500K | 80+ | DLC |
| LTPLL-18W-40K-2G11 | PLL · 2G11 | 2G11 | 18W | 55W | 1,800 | 4000K | 80+ | DLC |
| LTPLL-18W-50K-2G11 | PLL · 2G11 | 2G11 | 18W | 55W | 1,800 | 5000K | 80+ | DLC |
▸ OTHER WATTAGES ON REQUEST · CONTACT SALES@ARCHIPELAGOLIGHTING.COM
SISTER FAMILIES IN THIS COLLECTION